Joined in 2023 
82 
63 About this deal
Depending on your need, other forms of foam may be better. Polyurethane foam is available as a two part mix liquid, that you stir, wait 30 seconds then pour (as it starts creaming) and also as a two part pressurised gas bottle kit. Both these foams are superior to gun foam in nearly every way, though the liquid version is far less controllable and the gas bottle version about 3x more expensive (600 version, other versions may vary)
Great Stuff™ uses a straw dispenser; Great Stuff Pro™ has both straw- and gun-applicator options to dispense foam. Our online selection of Expanding Foam Guns are there when you need to seal up draughts and keep cavities closed up for safety. They are ideal for a number of projects, such as wall preparation and interior design, giving you the ability to achieve a professional finish and a smooth surface before painting. We've brought together many of the industry's leading brands and paired them with the best prices to make sure you can confidently approach any project you're working on today. You must make our sales office aware of these restrictions or the delivery may fail. Smaller vehicles (7.5 ton) can be arranged as a special requirement please be aware this can cause delays as there are far fewer available and further charges may apply. Q.The Great Stuff Pro™ Gasket Gun looks similar to Great Stuff Pro™ polyurethane foam guns. Can I use one of those?
Leave Accidents Alone
Our sales office will need to be made aware of any delivery restrictions, such as narrow lanes, overhanging trees etc. that may cause restrictions. type A1 according to standard EN 14387) is used. Gas/vapour spreads at floor level: ignition hazard All damaged or missing items should be reported to the driver and signed for as damaged or missing, wherever possible. The gun works with great stuff pro handi-foam, handi-seal, touch ‘n foam, touch ‘n seal, hilti, and todol insulating foam sealants. Most importantly, the foam seal long reach expanding foam gun is designed for professionals in the weatherization of residential and commercial buildings. Delivery will arrive between 8.30am–5pm if you cannot be there to accept the delivery, it is important to leave a note for the driver with instructions where to leave the pallet or the delivery will fail.
Clean the gun basket and tip by generously spraying and removing uncured foam with Great Stuff™ Foam Cleaner.
There are three guns made by Dow for dispensing their Great Stuff Pro expanding foam. The models are the Pro 13, Pro 14, and Pro 15. All three guns are actually made in Switzerland by a company called Todol and there are a few mostly minor differences between the models: If you have a gravel drive it will not be possible to leave the goods without someone being in attendance. Persons already sensitised to diisocyanates may develop allergic reactions when using this product.
Remove the can from the dispensing gun and spray into waste receptacle without the can until the gun is completely empty. Please see this document for more information surrounding the disposal and recycling information of Great Stuff™ and Great Stuff Pro™ Polyurethane Foam products.H222 Extremely flammable aerosol.H229 Pressurised container: may burst if heated.H351 Suspected of causing cancer.H362: May cause harm to Breast-fed children.H332 Harmful if inhaled.H373 May cause damage to organs through prolonged or repeated exposure.H319 Causes serious eye irritation.H335 May cause respiratory irritation.H315 Causes skin irritation.H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.H317 May cause an allergic skin reaction.H413 May cause long lasting harmful effects to aquatic life. Q.Are the Great Stuff™ Insulating Foam Sealant and Great Stuff Pro™ Polyurethane Foam Sealant cans recyclable and are there restrictions on their disposal? We started by loading up a can of Great Stuff Pro Window & Door Expanding Foam onto the gun. The best way to do this is by pressing down and actually screwing the gun onto the can. This affords you the best possible connection and reduces the likelihood of cross-threading the can incorrectly onto the Teflon-coated adapter. We grabbed a piece of scrap plywood and started running beads using the minimum setting of the flow control valve and then gradually opened it up to attempt large bead sizes. The results speak for themselves:
Great Deal 
New Comment